Many disc shaped VTOL aircraft designs use the Coanda effect to generate the vertical thrust to lift the aircraft. The cool thing about it, is the not-using of rotary wings or jets. No part of the propulsion system has to stick out of the body. This looks great, but it may also be important for being less vulnerable in certain circumstances, like being in space, flying supersonic, or flying through a city.
The Coanda effect is useful for vertical take off and landing, but will be distorted when the speed relative to the ambient air increases. It only works within the atmosphere (and under water). A disc shaped body can generate thrust for lift, but never as efficient as wings do (although a disc might work better than wings at extremely high altetudes).
It's not clear to me how energy efficient the Coanda effect is relative to a rotary wing or duckted fan. If a lot of ambient air is sucked into the airflow, increasing the mass, then it might be pretty good.
The coanda effect is describing how an airstream gets pushed against a surface, even when the surface is curved away from the direction of flow. No: it doesn't really stick to a surface, that's only how it looks like. The airpressure between the airstream and surface is lower IF the surface is curved away from the flow. The "fast air has less pressure" is a false statement, because there is no such thing as "fast air". Speed is relative.
The coanda effect can be used to:
- Make air flow outside a disc body.
- Adding ambient air to the airstream, thus adding weight and improving efficiency.
The ambient air is pulling the airstream, and the airstream is pulling the ambient air. This causes lower air pressure inside and around the airstream. But soon will this pulling and pushing cause turbulence.
When blowing an airstream close to a solid surface, the interaction of the airstream causes a drop of air pressure inbetween the airstream and the surface. The ambient air at the other sides of the airstream and surface pushes the two together.
Remember the power of sea level airpressure: about 1 KG/CM2
A curved surface causes a continuing acceleration of the airstream, and thus a continuing area of low pressure between the airstream and the surface.
The airstream though, should not be bent beyond 90º. More than 90º would cause negative thrust. But going beyond 90º can be useful if the goal is to gather all air under the disc, building an area of higher air pressure.
DRAG & TURBULENCE
Main trouble of the coanda effect is the airstream becoming turbulent and detaching from the surface, like how a wing stalls. Drag causes turbulence, drag from the surface and from the ambient air. It's a goal to drag as much as possible ambient air into the airstream, but the drag caused by the difference in velocity between the airstream and the surface is just a loss of energy. If the airstream gets turbulent and stops following the curved surface, there's no more low airpressure, no more thrust.
BOUNDARY LAYER CONTROL
An airstream can be "glued" to a surface by boundary layer control, using suction or acceleration.
Suction
It literary sucks the airstream towards the curved surface, even when it got turbulent!
A wing full of holes can deliver that sucktion, if the air inside the wing is pumped out fast. Extreme low pressure can be reached this way, on top of the surface.
Boundary layer suction is complex because the amount and position of optimal suction varies. If the airstream is stronger than the suction, and no vaulve is in place, then the air is sucked out instead of in, and that can cause the airstream to detach from the curved surface, turn from laminair into turbulent.
When using a flat surface and a lot of distance between the airstream and the surface, there is no airstream-surface drag. When sucking away the air inbetween, a great area of low air pressure can arise, meaning: thrusts.
The air sucked can become the airstream, but a closed loop would obviously not produce any thrust. The airstream is very powerful at first, and able to suck in many times it's weigh of ambient air into the stream. If enlarged 6 times, sucking in 1 time still 5 times untouched to produce thrust.
Acceleration
Adding "fast air" is easier. The added air accelerats the boundary layer and the airstream already out there. The whole airstream could be the result of many small jets plus a lot of ambient air.
